Walnut Flat File
Walnut, Steel Square & Angle, Hard board & Teak Oil.
A Big project that took many nights over 2-3 weeks. preparing the walnut to a certain level of finish and size. Gluing up the main body so it's grain is continuous. Steel was cut to size and welded. Shelves were cut from hardboard and grooves were cut into the main body to receive these selves
$25 Commission Consult
Dry Preassembly throughout was done and only with a perfect dry fit was everything assembled and glued up so that the metal supports and shelves cannot be removed.
Angle steel hides rollers on the underside for a clean look and the ability to move this around as required to double as ad-hoc seating.